Mitox CS50 Manual do Operador descarregar pdf (Página 20)

CS45 / CS50 / CS56 Chainsaw

Original Instructions Version April 12

Maintenance After Each Use

Oiling port

Dismount the guide bar and check the oiling port (1) for clogging.

Guide bar

When the guide bar is dismounted, remove sawdust from the bar groove and the oiling port.

Grease the nose sprocket with a sprocket grease gun (Oregon part number 21939)

1. Guide bar groove

2. Oil hole

3. Drive sprocket

4. Grease point

Others

Check for fuel leakage and loose fastenings and damage to major parts, especially handle joints and guide

bar mounting. If any defects are found, make sure to have them repaired before operating the saw again.

Check for cracks and for excessive wear interfering with the chain drive. If the wear is considerable, replace it

with a new one. Never t a new chain on a worn sprocket, or a worn chain on a new sprocket.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Sem comentários

Mitox CS50 Manual do Operador Página 20